Twisting machine С-4
The C-4 machine is designed for twisting insulated cores of 2, 3 and 4-core installation wires with fluoroplastic insulation from sintered film SKLF-4D (PTFE) and oriented fluoroplastic film - 4 grade EO (Teflon) . Capacity up to 50 m/min.
Technical specifications of twister C-4
| Machine type | lantern twister with twist-off |
| Number of output coils | 4 |
| Linear stranding speed | up to 50 m/min |
| Twist direction | reverse (right and left) |
| Twist pitches | from 10 to 150 mm |
| Number of turns of the headlamp | up to 339 rpm |
| Preset parameters | |
| Insulated core diameter | 0.25* to 2.5 mm |
| Conductor section | from 0.03* to 0.75 mm2 |
| Twisted workpiece diameter | up to 8 mm |
| Sending and receiving tare parameters | |
| Metal coil | 4…20 |
| cheek diameter, mm | 270 |
| tummy diameter, mm | 82 |
| axle diameter, mm | 36 |
| cheek spacing,(inner) mm | 130 |
| cheek spacing,(outer) mm | 150 |
| Receiving container | |
| plastic coil No. 250 TU 16-507.000-82 | |
| metal and plastic drums (cheek diameter up to 500 mm) | |
| diameter for – 56 mm, distance between cheeks – 290 mm | |
| Additional requirements | |
| presence of wire breaker | |
| the presence of a system of automatic maintenance of the specified tension for: up to 10 kg) with an accuracy of maintaining tension no more than 10%. | |
| smooth start of the twisting machine | |
| machine stop indication | |
| display speed, footage counter, flashlight revolutions on the control panel. | |
| the display of the workpiece tension on the output coils is carried out on the scales of the brake devices. | |