Line LPKP-7,5-500 for rewinding and control of wires
The line is designed to control the insulation of wires with a cross section of up to 7.5 mm2 and rewind them from the sending coil to the receiving coil.
Composition
- The console donator is active. The spool is lifted by an electro-mechanical hoist. The clamping of the coil in the quills is carried out by a clamping quill with an electro-mechanical drive - 1 pc.
- Compensator to control the speed and tension of the wire on the pay-off device - 1 pc.
- Sonic dry test apparatus (ZASI), (Sikora) - 1 pc.
- Length counter - 1 pc
- Console receiver with spreader based on screw-nut transmission and servo drive. The spool is lifted by an electro-mechanical hoist. The clamping of the coil in the quills is carried out by a clamping quill with an electro-mechanical drive - 1 pc.
- Electrical equipment based on the controller and operator panel (Siemens) - 1 pc.
Specifications
| Wire insulation materials: | |
| - polyethylene; | |
| - PTFE; | |
| - PVC compound. | |
| Rewindable wire diameter, mm | from 3.0 to 7.5 |
| Rewind speed: up to 200 m/min. The machine must work steadily over the entire speed range. Adjusting the speed mode: when working with ZASI, the speed of 100 m/min is set by the “constant speed” button. When working without ATIS, the speed varies from the foot pedal in the range up to 200 m/min. | |
| Speed ??Accuracy, % | ±0.5 |
| Linear speed variation method | smooth |
| Test voltage, kV | from 0.5 to 15.0 |
| Electrode assembly length, mm | 100 |
| Wire rewind tension: | |
| - matched on sender and receiver; | |
| - from 10 to 150 N. | |
| Dimensions of receiving-delivery containers, mm | 500 |
| Nesting spacing on receiving container, mm | from 2.8 to 7.7 |
| The layout device must provide row layout. Layout pitch resolution, mm | 0,1 |
Photos of the rewinding and checking line
